Our through conduit slide valve, floating seats :
Through conduit design, no retention areas, no pressure loss.
For continuous bi-directional sealing, increased lifetime, non abrasive products
| DN 50 to DN 1200 |
| 2" à 48" |
| PN 2.5 to PN 50 | 75 to 300 lbs |
Type: 202
Functions - Through conduit slide valve, floating seats
♦ shut off valve for in-line installation
Construction - Through conduit slide valve, floating seats
- Construction materials: Carbon Steel (CS), Stainless Steel (SS)
- Construction methods: Fabricated (Welded), Cast
Uses - Through conduit slide valve, floating seats
- Service conditions: High temperature, Low temperature, Corrosion, High viscosity, Vacuum
- Types of fluids: Liquids, Liquids with solid particles – Slurry, Gas, High viscosity fluids
- Applications: Petrochemicals
| DN 50 to DN 1200 |
| 2" à 48" |
| PN 2.5 to PN 50 | 75 to 300 lbs |
Features
♦ bi-directional tightness by metal-to-metal or gasket-to-metal gate/seat contact (flow direction marked on body)
♦ floating, spring loaded seats, ensuring a very good tightness
♦ no fluid entry in body at full opening
♦ through conduit design, no retention area, line pigging enabled
♦ bolted stuffing box, self-adjusted with spring washers
♦ PED 97/23/EC compliant
Operation
Handwheel,double acting pneumatic actuator,single acting pneumatic actuator (limited by size/pressure class and/or stroke),hydraulic actuator,electric motor,air motor
Closing device
gate
Options - Through conduit slide valve, floating seats
- adaptation to any type of connection
- hard faced seating surfaces
- gate scraper
- spring loaded seat
- removable upstream sleeve
- removable upstream/downstream sleeves (easier maintenance)
- reduced bore design
- additional body nozzles for draining and/or steam cleaning
- removable bottom for body cleaning
- firesafe design
- leak detector at stuffing box
- stroke limit or proximity switches
- dry air actuator
- pneumatic actuator with manual override
- stainless steel pneumatic actuator
- actuator locking system (safety)
- manual operator with locking mechanism
- extended manual operator, optionally with cardans
- manual operator mounted on ISO base for later adaptation of actuator
- electric actuator with local/remote controls
CAUTION : some options are not compatible