Our spray and rinse valve, metal seated :
For cleaning PVC deposits on reactor walls
Tank rinsing/cleaning by orientable concentrated jet
| DN 10 to DN 200 |
| 3/8" to 8" |
| PN 10 to PN 100 | 150 to 600 Lbs |
Type: 601
Functions - Spray and rinse valve, metal seated
♦ spraying or streaming rinsing of reactor walls : installation on dome
Construction - Spray and rinse valve, metal seated
- Construction materials: Carbon Steel (CS), Stainless Steel (SS), Duplex & Super Duplex, Inconel & Incoloy®, Titanium, Zirconium, Uranus® B6, Tantalum, Nickel, Hastelloy®, Monel
- Construction methods: Fabricated (Welded), Cast
Uses - Spray and rinse valve, metal seated
- Service conditions: High pressure, High temperature, Corrosion, High viscosity, Vacuum
- Types of fluids: Liquids
- Applications: Plastics and polymers, General chemicals, Petrochemicals
| DN 10 to DN 200 |
| 3/8" to 8" |
| PN 10 to PN 100 | 150 to 600 Lbs |
Features
♦ polished piston
♦ metal-to-metal piston/seat tightness
♦ position indicator
♦ 60° inlet
♦ bolted stuffing-box, live loaded with spring washers
♦ solid connection flanges
♦ in compliance with PED 97/23/EC
Operation
Double acting pneumatic actuator,single acting pneumatic actuator (limited by size, pressure class and/or stroke),hydraulic actuator,electric motor,air motor
Closing device
hollow piston
Options - Spray and rinse valve, metal seated
CAUTION : some options are not compatible
- adaptation to any type of connection
- other outlet angle
- hard faced seating surfaces according to media and/or pressure
- vacuum tight
- firesafe design
- FDA grade gaskets and packings
- leak detector at stuffing box
- interchangeable seat
- stroke limit or proximity switches
- manual override for pneumatic actuator
- dry air actuator
- stainless steel pneumatic actuator
- pneumatic actuator with stroke damper if trip time > 50 mm/s
- actuator locking system (safety)
- electric actuator with local/remote controls