Our slide gate valve w. fixed seats :
Through conduit design, no retention areas, no pressure loss.
For continuous bi-directional sealing, increased lifetime, abrasive products
| DN 50 to DN 1200 |
| 2" à 48 " |
| PN 2.5 to PN 50 | 75 to 300 lbs |
Type: 205
Functions - Slide gate valve w. fixed seats
♦ shut off valve for in-line installation
Construction - Slide gate valve w. fixed seats
- Construction materials: Carbon Steel (CS), Stainless Steel (SS)
- Construction methods: Fabricated (Welded), Cast
Uses - Slide gate valve w. fixed seats
- Service conditions: High temperature, Abrasion, Corrosion, High viscosity, Vacuum, Reliability
- Types of fluids: Liquids, Liquids with solid particles – Slurry, Gas, Powder and powdery media, High viscosity fluids
- Applications: Petrochemicals
| DN 50 to DN 1200 |
| 2" à 48 " |
| PN 2.5 to PN 50 | 75 to 300 lbs |
Features
♦ bi-directional tightness by metal-to-metal seat/gate contact
♦ fixed seats, low maintenance
♦ full bore, no fluid entry in body at full opening
♦ through conduit design, no retention area, line pigging enabled
♦ bolted stuffing box, self-adjusted with spring washers
♦ PED 97/23/EC compliant
Operation
Handwheel,double acting pneumatic actuator,single acting pneumatic actuator (limited by size/pressure class and/or stroke),hydraulic actuator,electric motor,air motor
Closing device
gate
Options - Slide gate valve w. fixed seats
- adaptation to any type of connection
- hard faced seating surfaces
- gate scraper
- spring loaded seat
- removable upstream sleeve
- removable upstream/downstream sleeves (easier maintenance)
- reduced bore design
- additional body nozzles for draining and/or steam cleaning
- removable bottom for body cleaning
- firesafe design
- leak detector at stuffing box
- stroke limit or proximity switches
- dry air actuator
- pneumatic actuator with manual override
- stainless steel pneumatic actuator
- actuator locking system (safety)
- manual operator with locking mechanism
- extended manual operator, optionally with cardans
- manual operator mounted on ISO base for later adaptation of actuator
- electric actuator with local/remote controls
CAUTION : some options are not compatible