Our slide gate valve for high temperature :
Through conduit design, no retention areas, no pressure loss.
Shut off valve for high temperature media such as catalyst
| DN 50 to DN 250 |
| 2" à 10" |
| PN 10 to PN 150 | 150 to 900 lbs |
Type: 207
Functions - Slide gate valve for high temperature
♦ shut off valve for in-line installation
Construction - Slide gate valve for high temperature
- Construction materials: Stainless Steel (SS)
- Construction methods: Fabricated (Welded), Cast
Uses - Slide gate valve for high temperature
- Service conditions: High temperature, Abrasion, Corrosion
- Types of fluids: Powder and powdery media
- Applications: Petrochemicals
| DN 50 to DN 250 |
| 2" à 10" |
| PN 10 to PN 150 | 150 to 900 lbs |
Features
♦ relative tightness obtained by metal-to-metal contact of slab gate with body sleeve
♦ slab gate and body sleeve entirely hard faced with stellite
♦ openings protected by stellite sleeves
♦ travel position indicator
♦ bolted stuffing-box, self-adjusted packings with spring washers
♦ integral end connection flanges
♦ In compliance with PED 97/23/EC.
Operation
Handwheel,double acting pneumatic actuator,single acting pneumatic actuator (limited by size/pressure class and/or stroke)
Closing device
gate
Options - Slide gate valve for high temperature
- adaptation to any type of connection
- reduced bore design
- additional body nozzles for draining
- leak detector at stuffing box
- stroke limit or proximity switches
- dry air actuator
- pneumatic actuator with manual override
- stainless steel pneumatic actuator
- actuator locking system (safety)
- manual operator with locking mechanism
- extended manual operator, optionally with cardans
CAUTION : some options are not compatible