Our sampling valve, compact design :
To analyse the evolution of the product ; suitable for liquids, liquids mixed with solids or powders.
To avoid product contamination by another agent
| DN25 to DN50 |
| 1" à 2" |
| PN10 to PN50 | 150 to 300 lbs |
Type: 616M
Functions - Sampling valve, compact design
♦ in tank/reactor or in-line sample removal
Construction - Sampling valve, compact design
- Construction materials: Stainless Steel (SS)
- Construction methods: Cast
Uses - Sampling valve, compact design
- Service conditions: Low temperature, Corrosion, High viscosity, Vacuum, Reliability
- Types of fluids: Liquids, Liquids with solid particles – Slurry, Gas, Powder and powdery media
- Applications: Fine chemicals, General chemicals
| DN25 to DN50 |
| 1" à 2" |
| PN10 to PN50 | 150 to 300 lbs |
Features
♦ polished piston and body inside/outside
♦ metal seated piston
♦ flush closing or extended piston
♦ stem with outside screw in yoke enclosure
♦ position indicator
♦ 60° outlet
♦ bolted stuffing-box, self compensated with spring washers
♦ NPT male or female connection
♦ In compliance with PED 97/23/EC
Operation
Handwheel
Closing device
conical seated piston
Options - Sampling valve, compact design
- adaptation to any type of connection
- hard faced seating surfaces
- body o’ring
- replaceable seat
- vacuum tightness
- additional draining or cleaning nozzles
- sterilizable design
- isolating valve on outlet branch
- sampling pot with protection enclosure
- stainless steel sample receiver
- firesafe design
- FDA grade gaskets and packings
- leak detector at stuffing box
- inside polishing
CAUTION : some options are not compatible