Our sampling valve, capacitive ball :
To analyse the evolution of the product ; suitable for liquids, liquids mixed with solids or powders.
A precise quantity of product can be taken out, compact design, safe and quick sample removal
| DN 15 to DN 200 |
| 1/2" à 8" |
| PN 10 to PN 50 | 150 to 300 lbs |
Type: 310N
Functions - Sampling valve, capacitive ball
♦ in tank/reactor or in-line sample removal
Construction - Sampling valve, capacitive ball
- Construction materials: Carbon Steel (CS), Stainless Steel (SS), Duplex & Super Duplex, Inconel & Incoloy®, Titanium, Zirconium, Uranus® B6, Tantalum, Nickel, Hastelloy®, Monel
- Construction methods: Fabricated (Welded), Cast, Solid
Uses - Sampling valve, capacitive ball
- Service conditions: Low temperature, Abrasion, Corrosion, High viscosity, Reliability
- Types of fluids: Liquids, Liquids with solid particles – Slurry, Gas, Powder and powdery media, High viscosity fluids
- Applications: General chemicals
| DN 15 to DN 200 |
| 1/2" à 8" |
| PN 10 to PN 50 | 150 to 300 lbs |
Features
♦ assembly on horizontal or vertical line
♦ sampling capacity : 15, 25, 50 or 100 ml
♦ compliance with PED 97/23/EC.
Operation
lever,double acting pneumatic actuator,single acting pneumatic actuator (limited by size/pressure class and/or stroke),electric motor,air motor
Closing device
ball
Options - Sampling valve, capacitive ball
- pad for vessel connection
- FDA grade gaskets and packings
- additional purge and/or cleaning nozzles
- heating jacket
- extended operating key
- sampling pot protection enclosure
- stainless steel sample receiver
CAUTION : some options are not compatible