Our lift type plug valve :
For quick operation ; no pressure loss
No friction during operation, hence optimal lifetime, mainly used with melt polymers
| DN 25 to DN 150 |
| 1" à 6" |
| PN 10 to PN 50 | 150 to 300 acc. to DN |
Type: 301
Functions - Lift type plug valve
♦ shut off valve for in-line installation
Construction - Lift type plug valve
- Construction materials: Carbon Steel (CS), Stainless Steel (SS), Duplex & Super Duplex, Inconel & Incoloy®, Titanium, Zirconium, Uranus® B6, Tantalum, Nickel, Hastelloy®, Monel
- Construction methods: Fabricated (Welded), Cast
Uses - Lift type plug valve
- Service conditions: High temperature, Low temperature, Abrasion, Corrosion, High viscosity, Vacuum, Low acoustic signature
- Types of fluids: Liquids, Liquids with solid particles – Slurry, Gas, High viscosity fluids
- Applications: Plastics and polymers
| DN 25 to DN 150 |
| 1" à 6" |
| PN 10 to PN 50 | 150 to 300 acc. to DN |
Features
♦ metal-to-metal seated plug
♦ opening/closing indicator
♦ bolted stuffing-box, self-adjusted packing compression with spring washers
♦ integral connection ends
♦ In compliance with PED 97/23/EC.
Operation
Handwheel + lever
Closing device
plug
Options - Lift type plug valve
- adaptation to any type of connection
- hard faced seating surfaces
- vacuum tightness
- pressure sensor
- additional draining and/or cleaning nozzles
- heating jacket
- firesafe design
- FDA grade gaskets and packing rings
- leak detector at stuffing box
- inside and/or outside polishing
- stroke limit or proximity switches
- manual operator with locking mechanism
CAUTION : some options are not compatible