Our control butterfly valve :
For frequent operation ; single, double or triple eccentric design
For flow regulating or flow control
| DN 50 to DN 300 |
| 2" à 12" |
| PN 10 to PN 50 | 150 to 300 acc. to DN |
Type: 401
Functions - Control butterfly valve
♦ flow regulating or flow control valve, in-line installation
Construction - Control butterfly valve
- Construction materials: Carbon Steel (CS), Stainless Steel (SS), Duplex & Super Duplex, Inconel & Incoloy®, Titanium, Zirconium, Uranus® B6, Tantalum, Nickel, Hastelloy®, Monel
- Construction methods: Fabricated (Welded), Cast, Solid
Uses - Control butterfly valve
- Service conditions: High temperature, Low temperature, Corrosion, High viscosity
- Types of fluids: Liquids, Liquids with solid particles – Slurry, Gas, High viscosity fluids
- Applications: Fine chemicals, Petrochemicals, Other applications
| DN 50 to DN 300 |
| 2" à 12" |
| PN 10 to PN 50 | 150 to 300 acc. to DN |
Features
♦ Class II tightness
♦ bolted stuffing-box, self-adjusted with spring washers
♦ one piece shaft mounted with bushings
♦ wafer type body
♦ PED/97/23/EC compliant
Operation
Handwheel (for regulating function only) ,single acting pneumatic actuator (limited by size/pressure class and/or stroke),electric motor
Closing device
disc
Options - Control butterfly valve
- leakage class III (type 402)
- adaptation to any type of connection
- dry air actuator
- pneumatic actuator with manual override
- stainless steel pneumatic actuator
- actuator locking in closed position (safety)
- stem isolation extension for high temperature service
- heating jacket
- FDA grade packings
- leak detector at stuffing box
- inside and/or outside polishing
- stroke limit or proximity switches
- extended manual operator, optionally with cardans
CAUTION, some options are not compatible